オーストラリアで、インターネットを使えるように、 Lebara のAPNを U8650に設定する
オーストラリアで使えるSIMを買う - Guutaraの日記 の続き。。
mobil Internatを使う為には、APNを設定しなければならない。と、いうか、それさえすれば、いいみたい。
で、サイトで調べると、
Mobile Internet | Internet Phone Service | Lebara
からたどって、
Mobile Internet Settings | Lebara Mobile
で、機種名をいれると、設定方法が、でてくる。
機種は、HUAWEI U8650
今回は、以下のような感じで、でてきた。
よく似た、設定が、デフォルトであるんだがなぁ。。
とりあえず、指定された、設定をいれておいた。
あとは、息子が、APNを切り替えて、使ってくれる事を、祈る。。
WAP Configuration
Setting up the Device
On the device, tap the Menu icon (or Applications > Menu).
Select Settings > Wireless & networks (or Wireless Controls) > Mobile networks > Access Point Names.
Press the Menu key and select New APN.
Select Name, enter Lebara WAP and tap OK.
Select APN, enter purtona.wap and tap OK.
Select Proxy, enter 10.202.2.20 and tap OK.
Select Port, enter 8080 and tap OK.
Enter the user name and password listed below. If no value is listed, leave the field blank.
Username:
Password:
Set the APN type to default or internet.
Press the Menu key and select Save.
If necessary, tap Access Point Names then tap the radio button next to Lebara WAP to set the profile as default.
Return to the home screen and launch the browser.
Press the Menu key and select More > Settings > Set home page.
Tap Set home page and enter http://au.lebara.mobi, then tap OK.
The settings are saved and the service is ready for use.
MMS Configuration
Setting up the Device
On the device, tap the Menu icon (or Applications > Menu)
Select Settings > Wireless & networks (or Wireless Controls) > Mobile networks > Access Point Names.
Press the Menu key and tap New APN.
Select Name, enter Lebara MMS and tap OK.
Select APN, enter purtona.wap and tap OK.
Enter the user name and password listed below. If no value is listed, leave the field blank.
User name:
Password:
Select MMSC, enter http://purtona.mms/mmssend and tap OK.
Select MMS proxy, enter 10.202.2.20 and tap OK.
Select MMS port, enter 8080 and tap OK.
If available, select Authentication type then select PAP
Set the APN type to mms.
Press the Menu key and select Save
The settings are saved and the service is ready for use.
Internet Configuration
Setting up the Device
On the device, tap the Menu icon (or Applications > Menu)
Select Settings > Wireless & networks (or Wireless Controls) > Mobile networks > Access Point Names.
Press the Menu key and select New APN.
Select Name, enter Lebara Internet and tap OK.
Select APN, enter purtona.net and tap OK.
Enter the user name and password listed below. If no value is listed, leave the field blank.
Username:
Password:
Set the APN type to default or internet.
Press the Menu key and select Save
If necessary, tap Access Point Names then tap the radio button next to Lebara Internet to set the profile as default.
Return to the home screen and launch the browser.
Press the Menu key and select More > Settings > Set home page.
Enter http://au.lebara.mobi and tap OK.
The settings are saved and the service is ready for use.
